A3COM-HUAWEI-RPR-MIB
File:
A3COM-HUAWEI-RPR-MIB.mib (49349 bytes)
Imported modules
Imported symbols
Defined Types
H3cRprRingletID |
|
Indicates the path on which data flow is selected.
The valid value is ringlet0 and ringlet1. They indicate
two RPR fiber rings. Ringlet0 refers to outer ring and
ringlet1 refers to inner ring. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
ringlet0(1), ringlet1(2) |
|
H3cRprServiceClass |
|
Indicates the service class of RPR.
The valid value is ClassC, ClassB, ClassA1 and ClassA0. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
classC(1), classB(2), classA1(3), classA0(4) |
|
H3cRprMaxmumDefineEntry |
|
SEQUENCE |
|
|
|
|
h3cRprMaxMumIfIndex |
InterfaceIndex |
|
|
h3cRprMaxStationNumDefine |
INTEGER |
|
|
h3cRprMaxReservedRateDefine |
Gauge32 |
|
H3cRprTopoImageXEntry |
|
SEQUENCE |
|
|
|
|
h3cRprTopoImageXWestEdgeStatus |
TruthValue |
|
|
h3cRprTopoImageXEastEdgeStatus |
TruthValue |
|
|
h3cRprTopoImageXStationName |
SnmpAdminString |
|
H3cRprSrcMacCountEntry |
|
SEQUENCE |
|
|
|
|
h3cRprSrcMacCountIfIndex |
InterfaceIndex |
|
|
h3cRprSrcMacCountBySrcAddress |
MacAddress |
|
|
h3cRprSrcMacCountReceivedFrames |
Counter64 |
|
|
h3cRprSrcMacCountReceivedOctets |
Counter64 |
|
H3cRprDestMacCountEntry |
|
SEQUENCE |
|
|
|
|
h3cRprDestMacCountIfIndex |
InterfaceIndex |
|
|
h3cRprDestMacCountByDestAddress |
MacAddress |
|
|
h3cRprDestMacCountReceivedFrames |
Counter64 |
|
|
h3cRprDestMacCountReceivedOctets |
Counter64 |
|
H3cRprPktDropCountEntry |
|
SEQUENCE |
|
|
|
|
h3cRprPktDropCntIfIndex |
InterfaceIndex |
|
|
h3cRprPktDropCntRingletID |
H3cRprRingletID |
|
|
h3cRprDownFlowClassAPktDrops |
Counter64 |
|
|
h3cRprUpFlowClassAPktDrops |
Counter64 |
|
|
h3cRprDownFlowClassBPktDrops |
Counter64 |
|
|
h3cRprUpFlowClassBPktDrops |
Counter64 |
|
|
h3cRprDownFlowClassCPktDrops |
Counter64 |
|
|
h3cRprUpFlowClassCPktDrops |
Counter64 |
|
H3cRprStaticRSEntry |
|
SEQUENCE |
|
|
|
|
h3cRprStaticRSIfIndex |
InterfaceIndex |
|
|
h3cRprStaticRSMacAddress |
MacAddress |
|
|
h3cRprStaticRSRingletID |
H3cRprRingletID |
|
|
h3cRprStaticRSTtl |
INTEGER |
|
|
h3cRprStaticRSValid |
TruthValue |
|
|
h3cRprStaticRSRowStatus |
RowStatus |
|
H3cRprIpv4DynamicRSEntry |
|
SEQUENCE |
|
|
|
|
h3cRprIpv4DynamicRSIfIndex |
InterfaceIndex |
|
|
h3cRprIpv4DynamicRSMacAddress |
MacAddress |
|
|
h3cRprIpv4DynamicRSRingletID |
H3cRprRingletID |
|
|
h3cRprIpv4DynamicRSTtl |
INTEGER |
|
H3cRprIpv6DynamicRSEntry |
|
SEQUENCE |
|
|
|
|
h3cRprIpv6DynamicRSIfIndex |
InterfaceIndex |
|
|
h3cRprIpv6DynamicRSMacAddress |
MacAddress |
|
|
h3cRprIpv6DynamicRSRingletID |
H3cRprRingletID |
|
|
h3cRprIpv6DynamicRSTtl |
INTEGER |
|
H3cRprIpv4OverallRSEntry |
|
SEQUENCE |
|
|
|
|
h3cRprIpv4OverallRSIfIndex |
InterfaceIndex |
|
|
h3cRprIpv4OverallRSMacAddress |
MacAddress |
|
|
h3cRprIpv4OverallRSType |
INTEGER |
|
|
h3cRprIpv4OverallRSRingletID |
H3cRprRingletID |
|
|
h3cRprIpv4OverallRSTtl |
INTEGER |
|
H3cRprVrrpRSEntry |
|
SEQUENCE |
|
|
|
|
h3cRprVrrpRSIfIndex |
InterfaceIndex |
|
|
h3cRprVrrpRSVirtualMacAddress |
MacAddress |
|
|
h3cRprVrrpRSMacAddress |
MacAddress |
|
|
h3cRprVrrpRSRingletID |
H3cRprRingletID |
|
|
h3cRprVrrpRSTtl |
INTEGER |
|
H3cRprDefaultRingIDEntry |
|
SEQUENCE |
|
|
|
|
h3cRprDefaultRingIDIfIndex |
InterfaceIndex |
|
|
h3cRprDefaultConfigRingletID |
H3cRprRingletID |
|
|
h3cRprDefaultActiveRingID |
H3cRprRingletID |
|
H3cRprDefectReportEntry |
|
SEQUENCE |
|
|
|
|
h3cRprDefectIfIndex |
InterfaceIndex |
|
|
h3cRprDefectCurrentStatus |
BITS |
|
H3cRprPriority2ClassMapEntry |
|
SEQUENCE |
|
|
|
|
h3cRprPriority2ClassMapIfIndex |
InterfaceIndex |
|
|
h3cRprPriority2ClassMapType |
INTEGER |
|
|
h3cRprPriorityValue |
INTEGER |
|
|
h3cRprPriority2ClassMap |
H3cRprServiceClass |
|
H3cRprRateLimitConfigEntry |
|
SEQUENCE |
|
|
|
|
h3cRprRateLimitConfigIfIndex |
InterfaceIndex |
|
|
h3cRprRateLimitConfigRingletId |
H3cRprRingletID |
|
|
h3cRprRateLimitConfigServiceClass |
H3cRprServiceClass |
|
|
h3cRprRateLimitConfigValue |
Integer32 |
|
H3cRprMacLearnCfgEntry |
|
SEQUENCE |
|
|
|
|
h3cRprMacLearnIfIndex |
InterfaceIndex |
|
|
h3cRprMacLearnRprMac |
MacAddress |
|
|
h3cRprMacLearnType |
INTEGER |
|
|
h3cRprMacLearnDestMac |
MacAddress |
|
|
h3cRprMacLearnVlanId |
Integer32 |
|
|
h3cRprMacLearnRinglet |
H3cRprRingletID |
|
|
h3cRprMacLearnTtl |
INTEGER |
|
|
h3cRprMacLearnIsValid |
TruthValue |
|
|
h3cRprMacLearnRowStatus |
RowStatus |
|
H3cRprTrapVarEntry |
|
SEQUENCE |
|
|
|
|
h3cRprTrapIfIndex |
InterfaceIndex |
|
|
h3cRprTrapRinglet |
H3cRprRingletID |
|
|
h3cRprTrapTopoMacAddress |
MacAddress |
|
|
h3cRprTrapIpAddress |
InetAddress |
|
Defined Values
h3cRpr |
1.3.6.1.4.1.43.45.1.10.2.60 |
This MIB manages RPR(Resilient Packet Ring)interfaces by
providing an operational table which controls parameters
of each RPR interface and reports alarm conditions.
A RPR ring is composed of two fiber rings: Outer and Inner. |
MODULE-IDENTITY |
|
|
|
h3cRprMaxmumDefineEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1 |
The entry of RPR Maximum Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprMaxmumDefineEntry |
|
|
h3cRprMaxStationNumDefine |
1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1.2 |
Max station number supported by RPR ring. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprMaxReservedRateDefine |
1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1.3 |
Max reserved rate supported by each RPR ringlet.
An estimate of the interface's current bandwidth in
units of 1,000,000 bits per second. If this object
reports a value of 'n' then the speed of the interface
is somewhere in the range of 'n-500,000' to
'n+499,999'. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. For a sub-layer which has no concept of
bandwidth, this object should be zero. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
h3cRprTopoImageXTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.2.1 |
This table contains additional objects
for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprTopoImageXEntry |
|
h3cRprTopoImageXEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1 |
Each entry contains information specific to a particular
station on the ring. The table has at least one entry for
the station itself, this entry indicates zero hops on each
ringlet. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprTopoImageXEntry |
|
|
h3cRprTopoImageXWestEdgeStatus |
1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.3 |
The current edge status of the west span.
If an edge exists,the h3cRprTopoImageXWestEdgeStatus is true.
Otherwise, the h3cRprTopoImageXWestEdgeStatus is false. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cRprTopoImageXEastEdgeStatus |
1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.4 |
The current edge status of the east span.
If an edge exists, the h3cRprTopoImageXEastEdgeStatus is true.
Otherwise, the h3cRprTopoImageXEastEdgeStatus is false. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cRprTopoImageXStationName |
1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.5 |
The operator assigned station name. The operator can assigned it
by h3cRprTopoImageXStationName. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
|
|
h3cRprSrcMacCountTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.1 |
The RPR Source Mac Count Table contains the cumulative sum
of frames and octects from the particular source station. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprSrcMacCountEntry |
|
h3cRprSrcMacCountEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1 |
An entry in the RPR Source Mac Count Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprSrcMacCountEntry |
|
|
h3cRprDestMacCountTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.2 |
The RPR Destination MAC Count Table contains the cumulative sum
of frames and octects to the particular destination station. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprDestMacCountEntry |
|
h3cRprDestMacCountEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1 |
An entry in the RPR MAC Destination Count Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprDestMacCountEntry |
|
|
h3cRprPktDropCountTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3 |
The RPR Packet Drop Count Table contains the cumulative sum
of packets dropped for congestion. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprPktDropCountEntry |
|
h3cRprPktDropCountEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1 |
An entry in the RPR Packet Drop Count Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprPktDropCountEntry |
|
|
h3cRprDownFlowClassAPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.3 |
The total dropped number of Class A packets which transmit
down from the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprUpFlowClassAPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.4 |
The total dropped number of Class A packets which transmit
up to the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprDownFlowClassBPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.5 |
The total dropped number of Class B packets which transmit
down from the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprUpFlowClassBPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.6 |
The total dropped number of Class B packets which transmit
up to the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprDownFlowClassCPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.7 |
The total dropped number of Class C packets which transmit
down from the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprUpFlowClassCPktDrops |
1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.8 |
The total dropped number of Class C packets which transmit
up to the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cRprRS |
1.3.6.1.4.1.43.45.1.10.2.60.1.4 |
OBJECT IDENTIFIER |
|
|
|
h3cRprStaticRSTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1 |
The RPR Static Ring Selection table contains the static
ring selection information by the way of configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprStaticRSEntry |
|
h3cRprStaticRSEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1 |
An entry in the RPR Static Ring Selection table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprStaticRSEntry |
|
|
h3cRprStaticRSRingletID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.3 |
The identifier of the ring which frames are sent
from one station to another. Ringlet0 refers to outer ring,
while ringlet1 does inner. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprStaticRSTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.4 |
The hops from source station to destination station by the
selected ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprStaticRSValid |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.5 |
The flag identify whether the configed ringlet is valid.
If it is true, the configed ringlet is valid, otherwise
it's invalid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cRprStaticRSRowStatus |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.6 |
The status of this table entry.
The status includes createAndGo, active and destroy. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
h3cRprIpv4DynamicRSTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.2 |
The RPR Ipv4Dynamic Ring Selection Table that contains the
dynamic ring selection information by shortest path. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprIpv4DynamicRSEntry |
|
h3cRprIpv4DynamicRSEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1 |
An entry in the RPR Ipv4Dynamic Ring Selection Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprIpv4DynamicRSEntry |
|
|
h3cRprIpv4DynamicRSRingletID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.3 |
The identifier of the ring which frames are sent
from the source station to the destination station. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprIpv4DynamicRSTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.4 |
The hops from source station to destination station by the
selected ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprIpv6DynamicRSTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.3 |
The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6
ring selection information by dynamic ring selection and static
ring selection. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprIpv6DynamicRSEntry |
|
h3cRprIpv6DynamicRSEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1 |
An entry in the RPR Ipv6 Ring Selection Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprIpv6DynamicRSEntry |
|
|
h3cRprIpv6DynamicRSRingletID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.3 |
The identifier of the ring which frames are sent
from the source station to the destination station. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprIpv6DynamicRSTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.4 |
The hops from source station to destination station by selected
ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprIpv4OverallRSTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.4 |
The RPR Ipv4 Overall Ring Selection Table that contains the
overall and active ring selection infomation by dynamic ring
selection and static ring selection. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprIpv4OverallRSEntry |
|
h3cRprIpv4OverallRSEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1 |
An entry in the RPR Overall Ring Selection Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprIpv4OverallRSEntry |
|
|
h3cRprIpv4OverallRSType |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.3 |
The ring selection item type indicates static or dynamic. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
static(1), dynamic(2) |
|
h3cRprIpv4OverallRSRingletID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.4 |
The identifier of the ring which frames are sent
from the source station to the destination station. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprIpv4OverallRSTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.5 |
The hops from source station to destination station by
selected ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprVrrpRSTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.5 |
The RPR VRRP Ring Selection Table that contains the ring
selection information when the vrrp group is configured. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprVrrpRSEntry |
|
h3cRprVrrpRSEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1 |
An entry in the RPR VRRP Ring Selection Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprVrrpRSEntry |
|
|
h3cRprVrrpRSMacAddress |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.3 |
The MAC address of the station that is the master in VRRP group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
h3cRprVrrpRSRingletID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.4 |
The identifier of the ring which frames are sent
from the source station to the destination station. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprVrrpRSTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.5 |
The hops from source station to destination station by
selected ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprDefaultRingIDEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1 |
An entry in the RPR Default RingID Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprDefaultRingIDEntry |
|
|
h3cRprDefaultActiveRingID |
1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1.3 |
The identifier of the default ring which is active currently.
The default ring configured by user may be inactive. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprDefect |
1.3.6.1.4.1.43.45.1.10.2.60.1.5 |
OBJECT IDENTIFIER |
|
|
|
h3cRprDefectReportEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.5.1.1 |
An entry in the RPR Defect Report Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprDefectReportEntry |
|
|
h3cRprDefectCurrentStatus |
1.3.6.1.4.1.43.45.1.10.2.60.1.5.1.1.2 |
Indicates the current status of RPR ring.
This attribute is used to notify the management system that
alarms generate or clear about some RPR ring. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
topologyOpenRing(0), topoInstability(1), topoInconsistent(2), dulpMacAddress(3), dulpIPAddress(4), lrttDefect(5), protCfgDefect(6), jumboCfgDefect(7), excessReservedRateDefect(8), excessMaxStationNum(9), miscabling(10), backPressure(11) |
|
h3cRprPriority2ClassMapEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1 |
An entry in the COS to Service Class Map Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprPriority2ClassMapEntry |
|
|
h3cRprPriority2ClassMapType |
1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.2 |
The type of Priority,include tag, mpls, ip. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tag(1), mpls(2), ip(3) |
|
h3cRprPriorityValue |
1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.3 |
The priority of tag,mpls and ip, the value range is 0~7. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
pri0(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8) |
|
h3cRprRateLimitConfigEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1 |
An entry in the RPR Rate Limit Configuration Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprRateLimitConfigEntry |
|
|
h3cRprRateLimitConfigValue |
1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1.4 |
The value of rate-limit that configured for diffrent service class.
The unit is permillage. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRprMacLearnCfgEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1 |
The entry of RPR MAC Address Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprMacLearnCfgEntry |
|
|
h3cRprMacLearnRprMac |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.2 |
The MAC address of the RPR station. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
h3cRprMacLearnType |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.3 |
The type of MAC address item that the user built. The type
includes static and dynamic. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprMacLearnVlanId |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.5 |
The vlan ID that the MAC address learned from by RPR staion. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4094 |
|
h3cRprMacLearnRinglet |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.6 |
The identifier of the ring which frames are sent
from the source station to the destination station. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprMacLearnTtl |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.7 |
The hops from source station to destination station on the
selected ringlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
h3cRprMacLearnIsValid |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.8 |
The flag identify whether the configured mac address is valid.
If it is true, the configured mac address is valid,
otherwise it's invalid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cRprMacLearnRowStatus |
1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.9 |
The status of this table entry.
The status includes createAndGo, active and destroy. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
h3cRprTrapVarTable |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1 |
The RPR Defect Report Table that contains varible that
used to bind in trap. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRprTrapVarEntry |
|
h3cRprTrapVarEntry |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1 |
An entry in the RPR Trap Var Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRprTrapVarEntry |
|
|
h3cRprTrapIfIndex |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.1 |
The ifIndex of RPR interface. It is only used for trap to bind. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
h3cRprTrapRinglet |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.2 |
The span of RPR station. It is only used for trap to bind. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
H3cRprRingletID |
|
|
h3cRprTrapTopoMacAddress |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.3 |
The MAC address of RPR station. It is only used for trap to bind. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
h3cRprTrapIpAddress |
1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.4 |
The IP address of RPR station. It is only used for trap to bind. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
InetAddress |
|
|
h3cRprTrap |
1.3.6.1.4.1.43.45.1.10.2.60.1.10 |
OBJECT IDENTIFIER |
|
|
|
h3cRprTopologyOpenRing |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.1 |
The topology openRing trap indicates that the RPR ring is opened. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprTopologyCloseRing |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.2 |
The topology openRing trap indicates that the RPR ring is closed. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprTopologyInconsistent |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.3 |
The topology inconsistent trap indicates that the topology of
RPR is inconsistent. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprTopologyInstability |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.4 |
The topology instability trap indicates that the topology of
RPR is instability. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprDuplicateMacAddress |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.5 |
The duplicate MAC address trap indicates that the mac address
of the station on the ring is dulplicate. That means there is the
same MAC address between two stations on the ring. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprDulplicateIPAddress |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.6 |
The dulplicate IP address trap indicates that the IP address of
the station on the ring is dulplicate. That means there is the same
IP address between two stations on the ring. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprIncompleteLRTT |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.7 |
The incomplete LRTT trap indicates that LRTT is not completed. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprProtecConfigInconsistent |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.8 |
The protection configuration inconsistent trap indicates that
the configuration of protection mode on the ring is inconsistent.
That is one station is configured steer mode while the other is
configured wrap mode. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprJumboConfigInconsistent |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.9 |
The jumbo configuration inconsistent trap indicates that the
configuration of jumbo mode on the ring is inconsistent.
That is one station supports jumbo frame while the other
doesn't support jumbo frame. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprExceedMaxReservRate |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.10 |
The exceeded max reserved rate trap indicates that the rate
on the ringlet exceeded the max reserved rate. The operator can
configure reserved rate for every station, but the sum of all
stations' reserved rate of each RPR ringlet can't exceed maximum. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprExceedMaxStationNum |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.11 |
The exceeded max station number trap indicates that the number
of the stations on the ring exceeded the max station number. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprMiscabling |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.12 |
The miscabling trap indicates that the miscabling event occurred. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprBackPressure |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.13 |
The back pressure trap indicates that the backpressure is generated
on the ringlet. That is the data flow on the ringlet exceeded
the range of rate-limit configured. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
h3cRprBackPressureOver |
1.3.6.1.4.1.43.45.1.10.2.60.1.10.14 |
The back pressure over trap indicates that the backpressure is
disappeared on the ringlet. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|