A3COM-HUAWEI-PPP-OVER-SONET-MIB
File:
A3COM-HUAWEI-PPP-OVER-SONET-MIB.mib (16057 bytes)
Imported modules
Imported symbols
Defined Types
H3cPosParamTableEntry |
|
SEQUENCE |
|
|
|
|
h3cPosCRC |
INTEGER |
|
|
h3cPosMTU |
INTEGER |
|
|
h3cPosScramble |
TruthValue |
|
|
h3cPosClockSource |
INTEGER |
|
|
h3cPosSdhFlagJ0 |
DisplayString |
|
|
h3cPosSdhFlagJ1 |
DisplayString |
|
|
h3cPosSonetFlagJ0 |
INTEGER |
|
|
h3cPosSonetFlagJ1 |
DisplayString |
|
|
h3cPosFlagC2 |
INTEGER |
|
|
h3cPosFrameType |
INTEGER |
|
|
h3cPosBindVlanId |
INTEGER |
|
|
h3cPosEncapsulation |
INTEGER |
|
|
h3cPoskeepaliveTimeout |
INTEGER |
|
|
h3cPosBERthresholdSF |
INTEGER |
|
|
h3cPosBERthresholdSD |
INTEGER |
|
|
h3cPosB1Error |
Counter64 |
|
|
h3cPosB2Error |
Counter64 |
|
|
h3cPosB3Error |
Counter64 |
|
|
h3cPosM1Error |
Counter64 |
|
|
h3cPosG1Error |
Counter64 |
|
|
h3cPosFlagJ0Type |
INTEGER |
|
|
h3cPosFlagJ1Type |
INTEGER |
|
|
h3cPosB1TCAThreshold |
INTEGER |
|
|
h3cPosB2TCAThreshold |
INTEGER |
|
|
h3cPosB3TCAThreshold |
INTEGER |
|
|
h3cPosB1TCAEnable |
INTEGER |
|
|
h3cPosB2TCAEnable |
INTEGER |
|
|
h3cPosB3TCAEnable |
INTEGER |
|
Defined Values
h3cPos |
1.3.6.1.4.1.43.45.1.10.2.19 |
This MIB manages POS(PPP Over Sonet)interfaces by providing
an operational table which controls parameters of each POS
interface and reports alarm conditions.
|
MODULE-IDENTITY |
|
|
|
h3cPosParamTableEntry |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cPosParamTableEntry |
|
|
h3cPosCRC |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.1 |
The length of CRC |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
crc32(1), crc16(2) |
|
h3cPosMTU |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.2 |
Maximum Transfer Unit (MTU) of POS interface |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
64..9192 |
|
h3cPosScramble |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.3 |
Scrambling is used to avoid continuous 0 or 1 in signals. This
object is to decide whether to scramble or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cPosClockSource |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.4 |
The value indicates the source of clock signal. System indicates
that clock signals are from device itself and line for clock signals
from remote |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
system(1), line(2) |
|
h3cPosSdhFlagJ0 |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.5 |
The section trace byte. This node is used when the frame type is sdh. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..15) |
|
h3cPosSdhFlagJ1 |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.6 |
The path trace byte. This node is used when the frame type is sdh. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..15) |
|
h3cPosSonetFlagJ0 |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.7 |
The section trace byte. This node is used when the frame type is sonet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
h3cPosSonetFlagJ1 |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.8 |
The path trace byte. This node is used when the frame type is sonet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..62) |
|
h3cPosFlagC2 |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.9 |
The parameter for the channel signal value of C2 byte |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
h3cPosFrameType |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.10 |
The frame type that encapsulates the packet. Default frame type is
sdh(Synchronous Digital Hierarchy) It also can be configured using
sonet type(Synchronous Optical Network). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sdh(1), sonet(2) |
|
h3cPosBindVlanId |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.11 |
The vlan that this pos port binds. The vlan can not include any other
port, otherwise error will be returned. If the vlan has a virtual
interface, the status of virtual interface will be up or down according
to the link status or this pos. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..4095 |
|
h3cPosEncapsulation |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.12 |
The type of encapsulation |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ppp(1), hdlc(2) |
|
h3cPoskeepaliveTimeout |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.13 |
The keeplive of hdlc. It is the query interval of link status. Two
members of a link should have same keeplive. The default 0 prohibits
detecting status of link. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..32767 |
|
h3cPosBERthresholdSF |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.14 |
The bit-error rate threshold for Signal Fault. SF threshold should
be greater than SD threshold. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..9 |
|
h3cPosBERthresholdSD |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.15 |
The bit-error rate threshold for Signal Degrade. SD threshold should
be less than SF threshold. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..9 |
|
h3cPosB1Error |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.16 |
Counter for SBIPE(Section Bit Interleave Parity Error) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cPosB2Error |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.17 |
Counter for LBIPE(Line Bit Interleave Parity Error) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cPosB3Error |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.18 |
Counter for PBIPE(Path Bit Interleave Parity Error) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cPosM1Error |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.19 |
How many times does LREI(Line Remote Error Indication) occur |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cPosG1Error |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.20 |
How many times does PREI(Path Remote Error Indication) occur |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cPosFlagJ0Type |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.21 |
The frame type that encapsulates the flag J0. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sdh(1), sonet(2) |
|
h3cPosFlagJ1Type |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.22 |
The frame type that encapsulates the flag J1. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sdh(1), sonet(2) |
|
h3cPosB1TCAThreshold |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.23 |
Threshold for B1 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..9 |
|
h3cPosB2TCAThreshold |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.24 |
Threshold for B2 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..9 |
|
h3cPosB3TCAThreshold |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.25 |
Threshold for B3 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..9 |
|
h3cPosB1TCAEnable |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.26 |
Enable traps of B1 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
h3cPosB2TCAEnable |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.27 |
Enable traps of B2 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
h3cPosB3TCAEnable |
1.3.6.1.4.1.43.45.1.10.2.19.1.1.1.28 |
Enable traps of B3 TCA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
h3cPosLOSAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.1 |
Alarm indicates loss of signal |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLOFAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.2 |
Alarm indicates loss of frame |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosOOFAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.3 |
Alarm indicates out of frame |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLAISAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.4 |
Alarm when LAIS(Line Alarm Indication Signal) arrives |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLRDIAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.5 |
Alarm when LRDI(Line Remote Defect Indication) arrives |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosPRDIAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.6 |
Alarm when PRDI(Path Remote Defect Indication) arrives |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosPAISAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.7 |
Alarm when PAIS(Path Alarm Indication Signal) arrives |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLOPAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.8 |
Alarm indicates loss of pointer |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosSTIMAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.9 |
Alarm indicates inconsistency between sent and received J0 bytes. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosPTIMAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.10 |
Alarm indicates inconsistency between sent and received J1 bytes. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosPSLMAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.11 |
Alarm indicates a mismatched C2 byte. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLSDAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.12 |
Alarm indicates that the B2 bit-error rate exceeds SD threshold. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosLSFAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.13 |
Alarm indicates that the B2 bit-error rate exceeds SF threshold. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosNormalAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.14 |
Alarm indicates that the Pos interface state returns normal. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosB1TCAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.15 |
Threshold crossing alarms for B1. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosB2TCAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.16 |
Threshold crossing alarms for B2. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
h3cPosB3TCAlarm |
1.3.6.1.4.1.43.45.1.10.2.19.2.0.17 |
Threshold crossing alarms for B3. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|