A3COM-HUAWEI-L2VPN-PWE3-MIB

File: A3COM-HUAWEI-L2VPN-PWE3-MIB.mib (10947 bytes)

Imported modules

A3COM-HUAWEI-OID-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

h3cCommon IpAddress Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue RowStatus
TEXTUAL-CONVENTION

Defined Types

H3cL2VpnVcEncapsType  
An indication of the L2Vpn's VC encapsulation type: Frame Relay DLCI ( Martini Mode ) (1) ATM AAL5 SDU VCC transport (2) ATM transparent cell transport (3) Ethernet Tagged Mode (4) Ethernet (5) HDLC (6) PPP (7) SONET/SDH Circuit Emulation Service Over MPLS (CEM) (8) ATM n-to-one VCC cell transport (9) ATM n-to-one VPC cell transport (10) IP Layer2 Transport (11) ATM one-to-one VCC Cell Mode (12) ATM one-to-one VPC Cell Mode (13) ATM AAL5 PDU VCC transport (14) Frame-Relay Port mode (15) SONET/SDH Circuit Emulation over Packet (CEP) (16) Structure-agnostic E1 over Packet (SAE1oP) (17) Structure-agnostic T1 (DS1) over Packet (SAT1oP) (18) Structure-agnostic E3 over Packet (SAE3oP) (19) Structure-agnostic T3 (DS3) over Packet (SAT3oP) (20) CESoPSN basic mode (21) TDMoIP basic mode (22) CESoPSN TDM with CAS (23) TDMoIP TDM with CAS (24) Frame Relay DLCI (25) IP-interworking (64) unknown (255)
TEXTUAL-CONVENTION    
  INTEGER frameRelayDlciMartini(1), atmAal5SduVccTransport(2), atmTransparentCellTransport(3), ethernetTagged(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmN2OneVccCellTransport(9), atmN2OneVpcCellTransport(10), ipLayer2Transport(11), atmOne2OneVccCellMode(12), atmOne2OneVpcCellMode(13), atmAal5PduVccTransport(14), frameRelayPortMode(15), cep(16), saE1oP(17), saT1oP(18), saE3oP(19), saT3oP(20), cESoPsnBasicMode(21), tDMoIPbasicMode(22), l2VpnCESoPSNTDMwithCAS(23), l2VpnTDMoIPTDMwithCAS(24), frameRelayDlci(25), ipInterworking(64), unknown(255)  

H3cPwVcEntry  
SEQUENCE    
  h3cPwVcIndex Integer32
  h3cPwVcID Unsigned32
  h3cPwVcType H3cL2VpnVcEncapsType
  h3cPwVcPeerAddr IpAddress
  h3cPwVcMtu Unsigned32
  hwPwVcCfgType INTEGER
  h3cPwVcInboundLabel Unsigned32
  h3cPwVcOutboundLabel Unsigned32
  h3cPwVcIfIndex Unsigned32
  h3cPwVcAcStatus INTEGER
  h3cPwVcStatus INTEGER
  h3cPwVcRowStatus RowStatus

Defined Values

h3cL2VpnPwe3 1.3.6.1.4.1.43.45.1.10.2.78
This MIB contains objects to manage PWE3.
MODULE-IDENTITY    

h3cL2VpnPwe3ScalarGroup 1.3.6.1.4.1.43.45.1.10.2.78.1
OBJECT IDENTIFIER    

h3cPwVcTrapOpen 1.3.6.1.4.1.43.45.1.10.2.78.1.1
Whether pwe3 trap is globally enabled. false: disable; true: enable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cL2VpnPwe3Table 1.3.6.1.4.1.43.45.1.10.2.78.2
OBJECT IDENTIFIER    

h3cPwVcTable 1.3.6.1.4.1.43.45.1.10.2.78.2.1
This table is the VC configuration table. Users can create or delete a VC by it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cPwVcEntry

h3cPwVcEntry 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1
Provides the information of a VC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cPwVcEntry  

h3cPwVcIndex 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.1
Index for the conceptual row identifying a PW within this PW Emulation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

h3cPwVcID 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.2
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cPwVcType 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.3
Indication of the L2Vpn's VC encapsulation type.
Status: current Access: read-create
OBJECT-TYPE    
  H3cL2VpnVcEncapsType  

h3cPwVcPeerAddr 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.4
This object contain the value of the peer ip address of the Martini VLL PW.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

h3cPwVcMtu 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.5
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW. The default value is 1500.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwPwVcCfgType 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.6
Indicates the type of the pw: 1: primary; 2: backup; 3: multiPort.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER primary(1), backup(2), multiPort(3)  

h3cPwVcInboundLabel 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.7
For Martini VLL, the value will be created by system automatically.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cPwVcOutboundLabel 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.8
For Martini VLL, the value will be created by the peer automatically.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cPwVcIfIndex 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.9
Index of the interface (or the virtual interface) associated with the PW.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cPwVcAcStatus 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.10
Local AC(Attachment Circuit) status: 1: down; 2: up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

h3cPwVcStatus 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.11
Indicates the status of the PW in the local node. 1: down; 2: up.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2)  

h3cPwVcRowStatus 1.3.6.1.4.1.43.45.1.10.2.78.2.1.1.12
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, h3cPwVcID, h3cPwVcType, h3cPwVcPeerAddr h3cPwVcMtu, hwPwVcCfgType and h3cPwVcIfIndex must be specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cL2VpnPwe3Notifications 1.3.6.1.4.1.43.45.1.10.2.78.3
OBJECT IDENTIFIER    

h3cPwVcSwitchWtoP 1.3.6.1.4.1.43.45.1.10.2.78.3.1
This notification is generated when switch from working pw to protect pw happens. The first group of h3cPwVcID/h3cPwVcTypeh3cPwVcPeerAddr is parameter of the work PW , and the second group of h3cPwVcID/h3cPwVcTypeh3cPwVcPeerAddr is parameter of the protect PW.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cPwVcSwitchPtoW 1.3.6.1.4.1.43.45.1.10.2.78.3.2
This notification is generated when switch from protect pw to working pw happens. The first group of h3cPwVcID/h3cPwVcTypeh3cPwVcPeerAddr is parameter of the protect PW , and the second group of h3cPwVcID/h3cPwVcTypeh3cPwVcPeerAddr is parameter of the work PW.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cPwVcDown 1.3.6.1.4.1.43.45.1.10.2.78.3.3
This notification indicates the VC's state changes to down.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cPwVcUp 1.3.6.1.4.1.43.45.1.10.2.78.3.4
This notification indicates the VC's state changes to up.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cPwVcDeleted 1.3.6.1.4.1.43.45.1.10.2.78.3.5
This notification indicates the VC is deleted.
Status: current Access: read-create
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor