A3COM-HUAWEI-L2ISOLATE-MIB

File: A3COM-HUAWEI-L2ISOLATE-MIB.mib (4232 bytes)

Imported modules

SNMPv2-TC A3COM-HUAWEI-OID-MIB SNMPv2-SMI

Imported symbols

TruthValue MacAddress RowStatus
h3cCommon OBJECT-TYPE MODULE-IDENTITY
Integer32

Defined Types

H3cL2IsolateEnableEntry  
SEQUENCE    
  h3cL2IsolateVLANIndex Integer32
  h3cL2IsolateEnable TruthValue

H3cL2IsolatePermitMACEntry  
SEQUENCE    
  h3cL2IsoLatePermitMAC MacAddress
  h3cL2IsoLatePermitMACRowStatus RowStatus

Defined Values

h3cL2Isolate 1.3.6.1.4.1.43.45.1.10.2.103
The MIB module is used for l2 isolation.
MODULE-IDENTITY    

h3cL2IsolateObject 1.3.6.1.4.1.43.45.1.10.2.103.1
OBJECT IDENTIFIER    

h3cL2IsolateEnableTable 1.3.6.1.4.1.43.45.1.10.2.103.1.1
A table for enabling/disabling layer-2-isolate for VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cL2IsolateEnableEntry

h3cL2IsolateEnableEntry 1.3.6.1.4.1.43.45.1.10.2.103.1.1.1
An entry for enabling/disabling layer-2-isolate for VLAN.
OBJECT-TYPE    
  H3cL2IsolateEnableEntry  

h3cL2IsolateVLANIndex 1.3.6.1.4.1.43.45.1.10.2.103.1.1.1.1
Represents index of VLAN for layer-2-isolate.
OBJECT-TYPE    
  Integer32 1..4094  

h3cL2IsolateEnable 1.3.6.1.4.1.43.45.1.10.2.103.1.1.1.2
Represents the layer-2-isolate status of VLAN.
OBJECT-TYPE    
  TruthValue  

h3cL2IsolatePermitMACTable 1.3.6.1.4.1.43.45.1.10.2.103.1.2
A table represents the permitting MAC address for the specific VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cL2IsolatePermitMACEntry

h3cL2IsolatePermitMACEntry 1.3.6.1.4.1.43.45.1.10.2.103.1.2.1
Each entry represents the permitting MAC address for the specific VLAN.
OBJECT-TYPE    
  H3cL2IsolatePermitMACEntry  

h3cL2IsoLatePermitMAC 1.3.6.1.4.1.43.45.1.10.2.103.1.2.1.1
Represents the MAC address permitted in the VLAN.
OBJECT-TYPE    
  MacAddress  

h3cL2IsoLatePermitMACRowStatus 1.3.6.1.4.1.43.45.1.10.2.103.1.2.1.2
RowStatus. Three actions are used: active, CreateAndGo, destroy.
OBJECT-TYPE    
  RowStatus